| | |
|
| |
| | |
|
|
IQAir InFlow W125
|
|
IQAir InFlow W125 Accessory
|
The IQAir InFlow W125
ducting kit enables any IQAir filtration system to draw air through a
wall or window vent into an indoor environment. Use of the InFlow W125
is advisable when the main pollution source is located in adjacent
indoor environments or outdoors.
Enjoy controlled clean air ventilation
An IQAir filter system combined with an InFlow W125 can be installed to
draw outdoor air into an indoor environment. In this setup, an IQAir
serves as a ventilation system, bringing in oxygen-rich outdoor air and
a filtration system, which removes undesirable outdoor pollutants such
as pollen, mold spores, dust and exhaust soot. As a result, fresh and
filtered outside air comes into the room.
|
|
Create clean positive pressure areas
An
IQAir filter system combined with an InFlow W125, which draws air into
a room will in most cases allow the creation of a positive pressure.
This positive pressure helps to clean the air in a room by constantly
flushing out air pollutants and by preventing outside pollutants from
entering the room.
Application Examples
- Protection of allergy sufferers from pollen exposure in their home
- Protection of patients from microbiological exposure (e.g. aspergillus) in a hospital
- Creation of clean research or manufacturing areas (controlled environments)
- Protection of plant control rooms from corrosive contaminants
- Creation
of a clean zone within a home or office which helps to prevent outdoor
pollution from nature, factories, traffic, agriculture to enter.
Using an InFlow W125 with an IQAir system can improve indoor air quality by:
- diluting polluted air with clean air
- flushing out air pollutants
- reducing influx of new outside pollutants due to a build-up of positive pressure
- by increasing oxygen content in indoor air (when outdoor air is being drawn in)
Installation
The InFlow W125 kit can be
easily added to any IQAir filtration unit in a matter of minutes. With
regards to the construction, the only modification required is a 5"
hole in a window, wall or door which allows you to connect the InFlow
W125 aluminum duct.
The
duct may be freely flexed to allow control over the desired vent
location. It is expandable in length, from 10" in its original
compressed state, to 39" when fully extended.
IQAir Compatibility
Compatible with all IQAir filtration devices.
Not compatible with the accessories PF40, VMF, VM FlexVac, VM InFlow and FlexVac.
 |
Product Reviews
|
|
|